Breakers

Breakers

Chisel Paste: Atlas Copco Chisel Paste

Features & benefits

  • Good resistance to water.
  • Excellent EP properties.
  • Good release effect.
  • Age-resistant.

Mineral oil-based paste containing an aluminium complex soap and solid lubricants. For temperatures from – 20ºC – + 1100ºC.For Atlas Copco hydraulic breakers and handheld hydraulic breakers as well as working tools & bushingson any other hydraulic breaker.


TEX 140PS: Pneumatic breaker (Hex 22×82,5) (7/8×3 1/4)

Features & benefits

  • Solid Body concept
  • Noise-reduction
  • SOFSTART™ two-step trigger
  • Rotating air inlet swivel
  • Integrated lubricator
  • Air cushioned piston

Applications

  • Service jobs
  • General demolition
  • For use in soft and medium material

TEX 140-280 is a range of light and medium sized breakers. They are ideal for service jobs and general demolition, but not for use in very hard materials or heavily reinforced concrete.

 

Technical Specifications
Breaker type Standard
Breaker Version Silenced
Shank Size (mm) Hex 22×82.5
Shank Size (inch) Hex 7/8×3 1/4
Weight 15.5 kg
Length 590 mm
Air consumption 25 l/s
Impact Rate 1530 blows/min
Vibration level 3 axes (ISO 28927-10) 15.2 m/s²
Sound power level guaranteed, Lw (2000/14/EC)* 104 dB(A)
Sound pressure level (ISO 11203)** Lp, r=1m 91 dB(A)

Cobra TTe, AWD: Petrol breaker – AWD shank size 32×160; 1 1/4×6 1/4

Features & benefits

  • New shank size 25x108mm
  • Quick set-up time
  • Easy to transport
  • HAPS™ Hand and Arm Protection System (up to 10% less vibrations than earlier models)
  • Can run on the alkylate petrol
  • Low emission
  • Low noise

Applications

In addition to tie tamping, the Cobra™ TT can be used for all kinds of maintenance work on tracks, crossings, access roads and railway stations:

  • Spiking wooden sleepers
  • Digging cable trenches
  • Breaking concrete
  • Cutting and compacting asphalt
  • Driving posts and fencing

Atlas Copco’s petrol driven breakers cover a wide range of applications like breaking concrete, cutting asphalt, tamping ballast and more. All without the need for power packs or cables. Cobra TT has been specially designed for tie tamping. It works at a relatively high frequency and the impact energy has been optimized to prevent pulverization of ballast.

 

Technical Specifications
Shank Size Hex 32×160
Weight 24 kg
Length 927 mm
Depth 331 mm
Width across handles 611 mm
Impact energy 40
Blow frequency 1620 bpm
Engine
Engine Type 1 cylinder, two-stroke
Cylinder Displacement 90 cc
Power 1.5 kW
Cooling System Fan cooled
Starter System Recoil starter
Fuel Type Alkylat or 90–100 octane unleaded petrol
Fuel capacity 1 l
Fuel consumption 0 – 0.8 l/h
Fuel mixture (%) 2
Oil type two-stroke oil or similar
Alkylate Yes
Vibration and Sound
Vibration level 3 axes (ISO 28927-10) 5.8 (breaking) 9.3 (drilling)
Vibration level 3 axes (ISO 28927-10) 3.8 m/s²
Sound power level guaranteed (2000/14/EC) 1) 109 dB(A)
Sound pressure level (ISO 11203) Lp, r=1m 96 dB(A)

Cobra TTe: Petrol breaker – Shank size 32×160; 1 1/4×6 1/4

Features & benefits

  • New shank size 25x108mm
  • Quick set-up time
  • Easy to transport
  • HAPS™ Hand and Arm Protection System (up to 10% less vibrations than earlier models)
  • Can run on the alkylate petrol
  • Low emission
  • Low noise

Applications

In addition to tie tamping, the Cobra™ TT can be used for all kinds of maintenance work on tracks, crossings, access roads and railway stations:

  • Spiking wooden sleepers
  • Digging cable trenches
  • Breaking concrete
  • Cutting and compacting asphalt
  • Driving posts and fencing

Atlas Copco’s petrol driven breakers cover a wide range of applications like breaking concrete, cutting asphalt, tamping ballast and more. All without the need for power packs or cables. Cobra TT has been specially designed for tie tamping. It works at a relatively high frequency and the impact energy has been optimized to prevent pulverization of ballast.

 

Technical Specifications
Shank Size Hex 32×160
Weight 24 kg
Length 927 mm
Depth 331 mm
Width across handles 611 mm
Impact energy 40
Blow frequency 1620 bpm
Engine
Engine Type 1 cylinder, two-stroke
Cylinder Displacement 90 cc
Power 1.5 kW
Cooling System Fan cooled
Starter System Recoil starter
Fuel Type Alkylat or 90–100 octane unleaded petrol
Fuel capacity 1 l
Fuel consumption 0 – 0.8 l/h
Fuel mixture (%) 2
Oil type two-stroke oil or similar
Alkylate Yes
Vibration and Sound
Vibration level 3 axes (ISO 28927-10) 3.8 m/s²
Sound power level guaranteed (2000/14/EC) 1) 109 dB(A)
Sound pressure level (ISO 11203) Lp, r=1m 96 dB(A)

Cobra PROe: Petrol breaker – Shank size 32×160; 1 1/4×6 1/4

Features & benefits

  • New shank size 25x108mm
  • Lighter
  • Shorter
  • HAPS™ Hand and Arm Protection System (up to 10% less vibrations than earlier models)
  • Can run on the alkylate petrol
  • Low emission
  • Low noise

Applications

  • Breaking concrete
  • Cutting asphalt
  • Tamping an compacting
  • Driving spikes, tubes, poles, ground rods and probes
  • Digging ditches and holes

CobraTM PROe is ideal for breaking, asphalt cutting and post driving. With 60 Joules at the tool tip it can break silica rich rocks and reinforced concrete. The new Cobra™ PROe is even better with more power, less noise and in two sizes. And its low vibration values will make you truly efficient.

 

Technical Specifications
Shank Size Hex 32×160
Weight 24 kg
Length 927 mm
Depth 331 mm
Width across handles 611 mm
Impact energy 60 Joules
Blow frequency 1440 bpm
Engine
Engine Type 1 cylinder, two-stroke
Cylinder Displacement 90 cc
Power 2 kW
Cooling System Fan cooled
Starter System Recoil starter
Fuel Type Alkylat or 90–100 octane unleaded petrol
Fuel capacity 1 l
Fuel consumption 0 – 0.8 l/h
Fuel mixture (%) 2
Oil type two-stroke oil or similar
Alkylate Yes
Vibration and Sound
Vibration level 3 axes (ISO 28927-10) 3.8 m/s²
Sound power level guaranteed (2000/14/EC) 1) 109 dB(A)
Sound pressure level (ISO 11203) Lp, r=1m 96 dB(A)

Cobra Combi: Petrol drill and breaker (Hex 22×108) (7/8×4 1/4)

Features & benefits

  • Easy to transport
  • Quick set-up time
  • HAPS™ Hand and Arm Protection System
  • Low emissions
  • Low noise

Applications

The multi-purpose Cobra Combi can be used for:

  • Drilling and slipping rocks
  • Breaking concrete
  • Cutting asphalt
  • Tamping and compacting
  • Driving spikes, tubes, poles, ground rods and probes
  • Digging ditches and holes

Atlas Copco’s petrol driven drill and breakers cover a wide range of applications like splitting rocks, breaking concrete, cutting asphalt, tamping ballast and more. All without the need for power packs or cables. The Cobra Combi is not only a self-contained breaker, it’s a powerful drill as well. It can sink holes to the depth of 2 metres, and drill up to 30 cm per minute in solid granite.

 

Technical Specifications
Weight 25 kg
Length 732 mm
Depth 281 mm
Width across handles 585 mm
Impact energy 22-25 (at 2700 bpm)
Impact rate, full speed 2700 bpm
Penetration rate with 34 mm drill bit 200 – 300 mm/min
Max drilling depth 2 m
Drill rotation speed 250 rpm
Engine
Engine Type 1 cylinder, two-stroke
Cylinder Displacement 185 cc
Power 2 kW
Cooling System Fan cooled
Starter System Magnapull
Fuel Type Petrol, 90-100 octane unleaded
Fuel capacity 1.2 l
Fuel consumption 1.3 – 1.5 l/h
Fuel mixture (%) 2
Oil type two-stroke oil or similar
Vibration and Sound
Vibration level 3 axes (ISO 28927-10) 5.8 (breaking) 9.3 (drilling)
Sound power level guaranteed (2000/14/EC) 1) 108 dB(A)
Sound pressure level (ISO 11203) Lp, r=1m 95 dB(A)