Drum Cutters

Drum Cutters

DC 600: Drum Cutter attachment for carriers from 8-15 t weight

Features & benefits

  • High torque gear motor for high productivity and motor lifetime
  • Cutter drum with optimized pick pattern for higher productivity
  • Robust housing design with HARDOX wear protection for higher uptime
  • High load resistant output shaft bearing system with lubrication-free slide ring seal system
  • Sturdy spur gears for optimum energy transmission and minimum service
  • Mechanical 360 degrees rotatable upper part for easy positioning

Our Drum Cutters are an excellent choice for rock or concrete wall and surface profiling, trenching, frozen soil excavation, soft rock excavation in quarries, demolition and dredging. They make a quick job out of material up to 100 Mpa. Drum Cutters can be used underwater to a depth of 20 m without additional installation. Due to small grain sizes, cut rock or concrete can be used as backfill material wtihout additional crushing. Low noise and vibration levels make our Drum Cutters suitable for use on restricted jobsites and in sensitive urban areas.

Technical Specifications
Carrier weight class 8 – 15 t
Service weight 600 kg
Nominal power 45 kW
Total length 965 mm
Total width cutting head 680 mm
Diameter of cutter drum 450 mm
Oil flow rage 75 – 125 l/min
Max. operating pressure 350 bar
Rotational speed 80 – 135 rpm
Pick speed 1.7 – 2.8 m/s
Number of picks 44 pc
Max. cutting force @ 350 bar 26 kN
Max. torque @ 350 bar 5.2 kNm
Max. rock hardness 40 MPa

DC 400: Drum Cutter attachment for carriers from 3-7 t weight

Features & benefits

  • High torque gear motor for high productivity and motor lifetime
  • Cutter drum with optimized pick pattern for higher productivity
  • Robust housing design with HARDOX wear protection for higher uptime
  • High load resistant output shaft bearing system with lubrication-free slide ring seal system
  • Sturdy spur gears for optimum energy transmission and minimum service
  • Mechanical 360 degrees rotatable upper part for easy positioning

Our Drum Cutters are an excellent choice for rock or concrete wall and surface profiling, trenching, frozen soil excavation, soft rock excavation in quarries, demolition and dredging. They make a quick job out of material up to 100 Mpa. Drum Cutters can be used underwater to a depth of 20 m without additional installation. Due to small grain sizes, cut rock or concrete can be used as backfill material wtihout additional crushing. Low noise and vibration levels make our Drum Cutters suitable for use on restricted jobsites and in sensitive urban areas.

Technical Specifications
Carrier weight class 3 – 7 t
Service weight 400 kg
Nominal power 30 kW
Total length 805 mm
Total width cutting head 610 mm
Diameter of cutter drum 370 mm
Oil flow rage 50 – 60 l/min
Max. operating pressure 350 bar
Rotational speed 90 – 160 rpm
Pick speed 1.5 – 2.7 m/s
Number of picks 64 pc
Max. cutting force @ 350 bar 17.8 kN
Max. torque @ 350 bar 3.1 kNm
Max. rock hardness 25 MPa

DC 2900: Drum Cutter attachment for carriers from 35-50 t weight

Features & benefits

  • High torque gear motor for high productivity and motor lifetime
  • Cutter drum with optimized pick pattern for higher productivity
  • Robust housing design with HARDOX wear protection for higher uptime
  • High load resistant output shaft bearing system with lubrication-free slide ring seal system
  • Sturdy spur gears for optimum energy transmission and minimum service
  • Mechanical 360 degrees rotatable upper part for easy positioning

Our Drum Cutters are an excellent choice for rock or concrete wall and surface profiling, trenching, frozen soil excavation, soft rock excavation in quarries, demolition and dredging. They make a quick job out of material up to 100 Mpa. Drum Cutters can be used underwater to a depth of 20 m without additional installation. Due to small grain sizes, cut rock or concrete can be used as back fill material without additional crushing. Low noise and vibration levels make our Drum Cutters suitable for use on restricted job sites and in sensitive urban areas.

Technical Specifications
Carrier weight class 35 – 50 t
Service weight 2900 kg
Nominal power 160 kW
Total length 1580 mm
Total width cutting head 1240 mm
Diameter of cutter drum 680 mm
Oil flow rage 275 – 410 l/min
Max. operating pressure 350 bar
Rotational speed 55 – 85 rpm
Pick speed 2 – 2.9 m/s
Number of picks 56 pc
Max. cutting force @ 350 bar 81.8 kN
Max. torque @ 350 bar 27.8 kNm
Max. rock hardness 100 MPa

DC 2100: Drum Cutter attachment for carriers from 25-40 t weight

Features & benefits

  • High torque gear motor for high productivity and motor lifetime
  • Cutter drum with optimized pick pattern for higher productivity
  • Robust housing design with HARDOX wear protection for higher uptime
  • High load resistant output shaft bearing system with lubrication-free slide ring seal system
  • Sturdy spur gears for optimum energy transmission and minimum service
  • Mechanical 360 degrees rotatable upper part for easy positioning

Our Drum Cutters are an excellent choice for rock or concrete wall and surface profiling, trenching, frozen soil excavation, soft rock excavation in quarries, demolition and dredging. They make a quick job out of material up to 100 Mpa. Drum Cutters can be used underwater to a depth of 20 m without additional installation. Due to small grain sizes, cut rock or concrete can be used as back fill material without additional crushing. Low noise and vibration levels make our Drum Cutters suitable for use on restricted job sites and in sensitive urban areas.

Technical Specifications
Carrier weight class 25 – 40 t
Service weight 2100 kg
Nominal power 120 kW
Total length 1420 mm
Total width cutting head 1000 mm
Diameter of cutter drum 670 mm
Oil flow rage 190 – 320 l/min
Max. operating pressure 350 bar
Rotational speed 45 – 85 rpm
Pick speed 1.6 – 2.7 m/s
Number of picks 48 pc
Max. cutting force @ 350 bar 69.9 kN
Max. torque @ 350 bar 23.4 kNm
Max. rock hardness 80 MPa

DC 2000: Drum Cutter attachment for carriers from 20-35 t weight

Features & benefits

  • High torque gear motor for high productivity and motor lifetime
  • Cutter drum with optimized pick pattern for higher productivity
  • Robust housing design with HARDOX wear protection for higher uptime
  • High load resistant output shaft bearing system with lubrication-free slide ring seal system
  • Sturdy spur gears for optimum energy transmission and minimum service
  • Mechanical 360 degrees rotatable upper part for easy positioning

Our Drum Cutters are an excellent choice for rock or concrete wall and surface profiling, trenching, frozen soil excavation, soft rock excavation in quarries, demolition and dredging. They make a quick job out of material up to 100 Mpa. Drum Cutters can be used underwater to a depth of 20 m without additional installation. Due to small grain sizes, cut rock or concrete can be used as back fill material without additional crushing. Low noise and vibration levels make our Drum Cutters suitable for use on restricted job sites and in sensitive urban areas.


Technical Specifications
Carrier weight class 20 – 35 t
Service weight 2000 kg
Nominal power 120 kW
Total length 1420 mm
Total width cutting head 880 mm
Diameter of cutter drum 670 mm
Oil flow rage 190 – 320 l/min
Max. operating pressure 350 bar
Rotational speed 60 – 110 rpm
Pick speed 2.1 – 3.6 m/s
Number of picks 44 pc
Max. cutting force @ 350 bar 52.2 kN
Max. torque @ 350 bar 17.5 kNm
Max. rock hardness 70 MPa

DC 200: Drum Cutter attachment for carriers from 1-3 t weight

Features & benefits

  • High torque gear motor for high productivity and motor lifetime
  • Cutter drum with optimized pick pattern for higher productivity
  • Robust housing design with HARDOX wear protection for higher uptime
  • High load resistant output shaft bearing system with lubrication-free slide ring seal system
  • Sturdy spur gears for optimum energy transmission and minimum service
  • Mechanical 360 degrees rotatable upper part for easy positioning

Our Drum Cutters are an excellent choice for rock or concrete wall and surface profiling, trenching, frozen soil excavation, soft rock excavation in quarries, demolition and dredging. They make a quick job out of material up to 100 Mpa. Drum Cutters can be used underwater to a depth of 20 m without additional installation. Due to small grain sizes, cut rock or concrete can be used as back fill material without additional crushing. Low noise and vibration levels make our Drum Cutters suitable for use on restricted job sites and in sensitive urban areas.

Technical Specifications
Carrier weight class 1 – 3 t
Service weight 200 kg
Nominal power 18 kW
Total length 610 mm
Total width cutting head 480 mm
Diameter of cutter drum 225 mm
Oil flow rage 30 – 60 l/min
Max. operating pressure 350 bar
Rotational speed 115 – 235 rpm
Pick speed 1.6 – 3.1 m/s
Number of picks 60 pc
Max. cutting force @ 350 bar 12.6 kN
Max. torque @ 350 bar 1.4 kNm
Max. rock hardness 20 MPa

DC 1200: Drum Cutter attachment for carriers from 15-23 t weight

Features & benefits

  • High torque gear motor for high productivity and motor lifetime
  • Cutter drum with optimized pick pattern for higher productivity
  • Robust housing design with HARDOX wear protection for higher uptime
  • High load resistant output shaft bearing system with lubrication-free slide ring seal system
  • Sturdy spur gears for optimum energy transmission and minimum service
  • Mechanical 360 degrees rotatable upper part for easy positioning

Our Drum Cutters are an excellent choice for rock or concrete wall and surface profiling, trenching, frozen soil excavation, soft rock excavation in quarries, demolition and dredging. They make a quick job out of material up to 100 Mpa. Drum Cutters can be used underwater to a depth of 20 m without additional installation. Due to small grain sizes, cut rock or concrete can be used as back fill material without additional crushing. Low noise and vibration levels make our Drum Cutters suitable for use on restricted job sites and in sensitive urban areas.

Technical Specifications
Carrier weight class 15 – 23 t
Service weight 1200 kg
Nominal power 80 kW
Total length 1200 mm
Total width cutting head 800 mm
Diameter of cutter drum 575 mm
Oil flow rage 140 – 250 l/min
Max. operating pressure 350 bar
Rotational speed 60 – 110 rpm
Pick speed 1.8 – 3.3 m/s
Number of picks 48 pc
Max. cutting force @ 350 bar 48.7 kN
Max. torque @ 350 bar 14 kNm
Max. rock hardness 60 MPa

DC 1000: Drum Cutter attachment for carriers from 10-18 t weight

Features & benefits

  • High torque gear motor for high productivity and motor lifetime
  • Cutter drum with optimized pick pattern for higher productivity
  • Robust housing design with HARDOX wear protection for higher uptime
  • High load resistant output shaft bearing system with lubrication-free slide ring seal system
  • Sturdy spur gears for optimum energy transmission and minimum service
  • Mechanical 360 degrees rotatable upper part for easy positioning

Our Drum Cutters are an excellent choice for rock or concrete wall and surface profiling, trenching, frozen soil excavation, soft rock excavation in quarries, demolition and dredging. They make a quick job out of material up to 100 Mpa. Drum Cutters can be used underwater to a depth of 20 m without additional installation. Due to small grain sizes, cut rock or concrete can be used as back fill material without additional crushing. Low noise and vibration levels make our Drum Cutters suitable for use on restricted job sites and in sensitive urban areas.

Technical Specifications
Carrier weight class 10 – 18 t
Service weight 1000 kg
Nominal power 65 kW
Total length 1130 mm
Total width cutting head 780 mm
Diameter of cutter drum 575 mm
Oil flow rage 110 – 170 l/min
Max. operating pressure 350 bar
Rotational speed 60 – 90 rpm
Pick speed 1.8 – 2.7 m/s
Number of picks 48 pc
Max. cutting force @ 350 bar 36.2 kN
Max. torque @ 350 bar 10.4 kNm
Max. rock hardness 50 MPa