Water Well drilling rigs

Water Well drilling rigs

T3W Water Well Drill: Water Well Drills

Features & benefits

  • Separate truck engine and a deck engine to power the drill
  • Hands-free holding wrench and foot-pedal activated top wrench increasing rig safety
  • Adaptive pipe handling that includes a carousel and single pipe loader, as well as drawworks and a hoist plug
  • Single 35 ft (10.6 m) derrick with 37 ft 5 in (11,400 mm) working clearance
  • On-demand power for improved efficiency

For over 100 years, Atlas Copco drills have had a major impact on the drilling community worldwide and have set the standard for quality, longevity, reliability, and performance. The T3W sits right in the middle of the Atlas Copco water well line. A combination of old and new technology on the T3W boosts productivity, efficiency and fuel savings while providing the familiarity and reliability you expect from an Atlas Copco drill. For more information about this new drill, click on the PDF-link to the right or visit your local Atlas Copco Drilling Solutions dealer.

Technical Specifications
Compressor pressure 24.1 bar
Compressor flow (text) 900 cfm or 1070 cfm (425 l/s or 505 l/s)
Deck engine Caterpillar C15, 475 hp (354 kW) at 1800 rpm Caterpillar C15, 575 hp (428 kW) at 1800 rpm
Pullback 18144 kg

T2W Water Well Drill: Water Well Drills

Features & benefits

  • A high-speed feed system equally fast in both directions to reduce time spent adding drill pipe and tripping from the hole
  • An internal guide system to assure alignment and promote longer component life
  • A smooth, responsive feed control for precise, trouble-free drilling

More features were designed into the T2W than any machine in its class, providing the benefits of larger, more expensive drilling rigs. With its open work area, excellent control of feed speed and exceptional on and off road mobility, the T2W is not only perfectly suited for water well drilling but also for a wide variety of environmental, air rotary and DTH drilling. The Atlas Copco T2W is a lightweight, truck-powered water well drill designed for air/mud applications.

Technical Specifications
Compressor pressure 300 psi / 2,068 kPa standard on large base machine 200 psi / 1,379 kPa optional small base machine
Compressor flow (text) 750 cfm / 21.24 m3 standard on large base machine 400 cfm / 11.33 m3 optional small base machine
Deck engine CAT C-13, 425 HP @ 2100 RPM, 1550 ft-lb. @ 1200 RPM IHC DT570, 310 HP @ 2200 RPM, 950 ft-lb. @ 1200 RPM
Pullback 13608 kg

Diamondback 40k: Diamondback 40k

Features & benefits

Modular Concept

The Diamondback’s modular approach ensures the rig is easily adaptable to change even after the customer has taken delivery of the unit. The rig has a plug-and-play feel to it meaning the customer can easily add or remove components as desired. This feature allows the customer to purchase kits after the rig has been purchased.

Two Tower Lengths

Depending on your preference and application, we offer two tower lengths: a 34 ft tower and the longer 38 ft tower which will accommodate a casing hammer

Rod Handling

We have a number of different rod handling solutions to suit our customer’s requirements whether it is a single rod loading system, swing in/swing out carousel or our hands-free rod handlers we can cater for all requirements.

Catwalks

Made from a steel construction with FRP non-slip decking, these catwalks enable easy access from the driller’s platform down either side of the rig.

Dump Angle Mast

The Diamondback comes with dump angle mast capability, allowing the tower to be angled up to 45o. This feature can also be used to slide the tower up and down in the vertical position to either change the table height or lift the table out of the way for better clearance under the table for welding or setting a diverter.

Pre-Plumbed and Wired

Whether you buy the option from Atlas Copco or bolt it on afterwards, we have made life easier by providing the hydraulic hoses and electrical connections for all standard options in the base of the rig. This gives you the opportunity to add additional components at a later date or configure the rig how you like it.

FRP Decking

We have replaced the traditional steel deck with FRP grating. This material is not only robust and has significant weight savings over steel, but it also gives the advantage of lending itself to bolting components to the deck without the need for drilling or welding.

For over 100 years, Atlas Copco drills have had a major impact on the drilling community worldwide and have set the standard for quality, longevity, reliability, and performance. The new Atlas Copco Diamondback with inclined drilling capability of 90 to 45 degrees offers drillers precisely the rig they need with shortened lead time. The rig’s bolt-on modular components – a new concept in rig design – make it the first truly multipurpose rig in the world, enabling drillers to respond quickly to rapid, after-sale changes in market opportunities.

Technical Specifications
Compressor pressure 24.1 bar
Compressor flow 505 l/s
Pullback 18144 kg
Tower Length 10.55 – 11.76 m