Mineral oil-based paste for Atlas copco hydraulic breakers and handheld hydraulic breakers.
| Technical Specifications | |
|---|---|
| Weight | 0.15 kg |
| Units in set | 20 |
This D-handle hammer is ideal for horizontal work in brick, mortar and light concrete. It is one of the most powerful pick hammers on the market. With its detachable front handle, the LH 11 is a popular choice for renovation, demolition and structural alteration jobs.
| Technical Specifications | |
|---|---|
| Shank Size (mm) | 22×82,5 |
| Shank Size (inch) | 7/8×3 1/4 |
| Weight, incl. hoses | 15.5 kg |
| Length | 650 mm |
| Oil flow | 20 l/min |
| Working pressure | 80 – 100 bar |
| Back Pressure, max | 10 bar |
| Impact Rate | 2300 blows/min |
| Vibration level 3 axes (ISO 28927-10) | 16.5 m/s² |
| Sound power level guaranteed, Lw (2000/14/EC)* | 105 dB(A) |
| Sound pressure level (ISO 11203)* Lp, r=1m | 92 dB(A) |
| EHTMA class | C |
Well balanced and easy to use, these drivers come with a remote control operating valve. The ground rod drivers accommodate a wide range of driving requirements for earth connectors to depths of 2-3 metres (7-10 ft). When operated with an optional hose-mounted remotecontrolled valve, the drivers can be run with both open- or closed-centre systems.
| Technical Specifications | |
|---|---|
| Weight, incl. hoses | 23 kg |
| Oil flow | 20 – 30 l/min |
| Working pressure | 105 – 125 bar |
| Impact rate at 30 l/min | 1600 blows/min |
| Hydraulic ports | ½” BSP |
| Bushing diameter | 25 mm |
| Vibration level 3 axes (ISO 28927-10)*, 20 lpm | 17.4 m/s² |
| Sound power level guaranteed, Lw (2000/14/EC)* | 110 dB(A) |
| Sound pressure level (ISO 11203)** Lp, r=1m | 99 dB(A) |
| EHTMA class | C/D |
| Bushing diameter | 25 mm |
Well balanced and easy to use, these drivers come with a remote control operating valve. The ground rod drivers accommodate a wide range of driving requirements for earth connectors to depths of 2-3 metres (7-10 ft). When operated with an optional hose-mounted remotecontrolled valve, the drivers can be run with both open- or closed-centre systems.
| Technical Specifications | |
|---|---|
| Weight, incl. hoses | 23 kg |
| Oil flow | 20 – 30 l/min |
| Working pressure | 105 – 125 bar |
| Impact rate at 30 l/min | 1600 blows/min |
| Hydraulic ports | ½” BSP |
| Bushing diameter | 16 mm |
| Vibration level 3 axes (ISO 28927-10)*, 20 lpm | 17.4 m/s² |
| Sound power level guaranteed, Lw (2000/14/EC)* | 110 dB(A) |
| Sound pressure level (ISO 11203)** Lp, r=1m | 99 dB(A) |
| EHTMA class | C/D |
| Bushing diameter | 16 mm |
These powerful, light and compact saws can be used to cut through concrete, asphalt and steel. Their simple hydraulic design with direct drive reduces maintenance, especially in comparison with belt-driven saws. They are easy to use thanks to the open cutting face, even under the most demanding conditions. With a lightweight cart you can use the saws for floor, road and other light surface jobs.
| Technical Specifications | |
|---|---|
| Weight, incl. hoses | 13 kg |
| Service weight, incl disc | 15 kg |
| Oil flow | 20 – 40 l/min |
| Max pressure | 170 bar |
| Revolutions | 2000 – 4000 rpm |
| Speed | 42 – 85 m/s |
| Disc size | 405 mm |
| Arbor size | 25.4 mm |
| Cutting depth | 160 mm |
| Vibration level 3 axes (ISO 28927-8) 20 lpm* | 4.9 m/s² |
| Sound power level guaranteed, Lw (2000/14/EC)* | 115 dB(A) |
| Sound pressure level (ISO 11203)* Lp, r=1m | 102 dB(A) |
| EHTMA class | C/D/E |
These powerful, light and compact saws can be used to cut through concrete, asphalt and steel. Their simple hydraulic design with direct drive reduces maintenance, especially in comparison with belt-driven saws. They are easy to use thanks to the open cutting face, even under the most demanding conditions. With a lightweight cart you can use the saws for floor, road and other light surface jobs.
| Technical Specifications | |
|---|---|
| Weight, incl. hoses | 12 kg |
| Service weight, incl disc | 13.5 kg |
| Oil flow | 20 – 30 l/min |
| Max pressure | 170 bar |
| Revolutions | 2500 – 4000 rpm |
| Speed | 46 – 75 m/s |
| Disc size | 355 mm |
| Arbor size | 25.4 mm |
| Cutting depth | 133 mm |
| Vibration level 3 axes (ISO 28927-8) 20 lpm* | 4.9 m/s² |
| Sound power level guaranteed, Lw (2000/14/EC)* | 99 dB(A) |
| Sound pressure level (ISO 11203)* Lp, r=1m | 86 dB(A) |
| EHTMA class | C/D |
These powerful drills are ideal for jobs where there is no space for drill stands. Due to the non-kick back operation, you can still drill holes of up to 200 mm (8 in) in diameter free hand. Fully hydraulic, the tools can be used for wet diamond core drilling on the toughest jobs. The LCD core drill offers spark free operation – there are no electrical components – for safe operation inside buildings, in hazardous environments and even underwater.
| Technical Specifications | |
|---|---|
| Weight, incl. hoses | 9 kg |
| Service weight, incl hoses and Ø 112 mm tool | 13 kg |
| Length, without drill | 406 mm |
| Oil flow | 20 – 30 l/min |
| Working pressure | 80 – 172 bar |
| Revolutions | 1500 – 2250 rpm |
| Drill Diameter | 12 – 75 mm |
| Hydraulic ports* | ½” BSP |
| Vibration level 3 axes (ISO 28927-5), 20 lpm** | 2.7 m/s² |
| Sound pressure level (ISO 11203)* | <70 dB(A) |
| EHTMA class | C/D |
TEX 140-280 is a range of light and medium sized breakers. They are ideal for service jobs and general demolition, but not for use in very hard materials or heavily reinforced concrete.
| Technical Specifications | |
|---|---|
| Breaker type | Standard |
| Breaker Version | Silenced |
| Shank Size (mm) | Hex 22×82.5 |
| Shank Size (inch) | Hex 7/8×3 1/4 |
| Weight | 15.5 kg |
| Length | 590 mm |
| Air consumption | 25 l/s |
| Impact Rate | 1530 blows/min |
| Vibration level 3 axes (ISO 28927-10) | 15.2 m/s² |
| Sound power level guaranteed, Lw (2000/14/EC)* | 104 dB(A) |
| Sound pressure level (ISO 11203)** Lp, r=1m | 91 dB(A) |
Applications
In addition to tie tamping, the Cobra™ TT can be used for all kinds of maintenance work on tracks, crossings, access roads and railway stations:
Atlas Copco’s petrol driven breakers cover a wide range of applications like breaking concrete, cutting asphalt, tamping ballast and more. All without the need for power packs or cables. Cobra TT has been specially designed for tie tamping. It works at a relatively high frequency and the impact energy has been optimized to prevent pulverization of ballast.
| Technical Specifications | |
|---|---|
| Shank Size Hex | 32×160 |
| Weight | 24 kg |
| Length | 927 mm |
| Depth | 331 mm |
| Width across handles | 611 mm |
| Impact energy | 40 |
| Blow frequency | 1620 bpm |
| Engine | |
| Engine Type | 1 cylinder, two-stroke |
| Cylinder Displacement | 90 cc |
| Power | 1.5 kW |
| Cooling System | Fan cooled |
| Starter System | Recoil starter |
| Fuel Type | Alkylat or 90–100 octane unleaded petrol |
| Fuel capacity | 1 l |
| Fuel consumption | 0 – 0.8 l/h |
| Fuel mixture (%) | 2 |
| Oil type | two-stroke oil or similar |
| Alkylate | Yes |
| Vibration and Sound | |
| Vibration level 3 axes (ISO 28927-10) | 5.8 (breaking) 9.3 (drilling) |
| Vibration level 3 axes (ISO 28927-10) | 3.8 m/s² |
| Sound power level guaranteed (2000/14/EC) 1) | 109 dB(A) |
| Sound pressure level (ISO 11203) Lp, r=1m | 96 dB(A) |
Applications
In addition to tie tamping, the Cobra™ TT can be used for all kinds of maintenance work on tracks, crossings, access roads and railway stations:
Atlas Copco’s petrol driven breakers cover a wide range of applications like breaking concrete, cutting asphalt, tamping ballast and more. All without the need for power packs or cables. Cobra TT has been specially designed for tie tamping. It works at a relatively high frequency and the impact energy has been optimized to prevent pulverization of ballast.
| Technical Specifications | |
|---|---|
| Shank Size Hex | 32×160 |
| Weight | 24 kg |
| Length | 927 mm |
| Depth | 331 mm |
| Width across handles | 611 mm |
| Impact energy | 40 |
| Blow frequency | 1620 bpm |
| Engine | |
| Engine Type | 1 cylinder, two-stroke |
| Cylinder Displacement | 90 cc |
| Power | 1.5 kW |
| Cooling System | Fan cooled |
| Starter System | Recoil starter |
| Fuel Type | Alkylat or 90–100 octane unleaded petrol |
| Fuel capacity | 1 l |
| Fuel consumption | 0 – 0.8 l/h |
| Fuel mixture (%) | 2 |
| Oil type | two-stroke oil or similar |
| Alkylate | Yes |
| Vibration and Sound | |
| Vibration level 3 axes (ISO 28927-10) | 3.8 m/s² |
| Sound power level guaranteed (2000/14/EC) 1) | 109 dB(A) |
| Sound pressure level (ISO 11203) Lp, r=1m | 96 dB(A) |
