All posts by Come on Kasi Sales

Enquiry

PAROIL M: Normal

Atlas Copco, Fluids and Lubricants, Portable air compressors
Leave a comment

Features & benefits

  • Excellent oxidation resistance.
  • Excellent water separation.
  • Excellent seal and paint compatibility.
  • Balanced composition on antifoam and air release.
  • Top protection against wear.

Put top quality oil in to get the best out of your compressors PAROIL M is a mineral based, premium quality oil with a high viscosity index and additives which provide the superior anti-wear and film strength and other performance characteristics necessary for the most critical applications. Atlas Copco Paroil M is purpose developed to provide high levels of performance and protection for single stage compressors in low-pressure applications working in standard ambient temperatures between -10° and +35° C. Extensive laboratory and field endurance tests on Atlas Copco equipment have proven PAROIL M to match all demands in varied conditions. This is critical for reliability and reduces the operating costs throughout the life time of the compressor. PAROIL M meets stringent quality control specifications to ensure your equipment will run smoothly and reliably.

Enquiry

QLT H40: Light tower – QLT H40

Atlas Copco, Light towers, Light towers
Leave a comment

Customer benefits

  • Quick to erect – The QLT H40 light tower is easy to operate and extremely light and maneuverable, so your operators can easily position it at the desired location. The fully automated hydraulic lift raises the tower to its full height in only 15 seconds.
  • Safety – A handbrake safety release prevents movement of the tower while the mast is being hoisted. Four outrigger stabilizers provide support.
  • High efficiency – The metal halide lamp technology employed in our QLT H40 is one of the most energy-efficient ways of turning electrical energy into light.
  • Long lifetime – The expected lifetime of the four 1000 W metal halide lamps in normal operation is very long, and the failure rate is the lowest of all types of lamps.
  • High productivity up to 80 hours – Thanks to its 145-liter fuel tank, the diesel engine can operate continuously for up to 80 hours.

Powered by a Perkins diesel engine, Atlas Copco’s QLT H40 light tower provides outstanding light for your temporary work environments, sporting events and other situations. It’s based on a concept that has been successfully used in the market for a long time. With the QLT H40 you get everything you need to set up a temporary light source: a metallic enclosure with an electrical cubicle for control and protection; a hydraulically raised mast that extends vertically up to 9.2 meters and rotates 350°; stabilization legs; and an on-road undercarriage with brakes

Enquiry

Air Filter: Genuine Parts

Atlas Copco, Genuine & Spare Parts, Light towers
Leave a comment

Features & benefits

Only genuine Atlas Copco air intake filters can offer.

  • High dirt holding capacity.
  • Separation efficiency > 99.9 %.
  • Absolute extraction of particles larger than 3 micron in size.
  • Minimum pressure drop to keep energy consumption extremely low.
  • Robust paper pleats.
  • Quality seals.
  • Full structural integrity in humid conditions.

Only Genuine parts stand for quality

Enquiry

Unigrout MAX 244 C: Advanced high performance grouting system containerized for truck mounting

Atlas Copco, Grouting equipments, Grouting systems
Leave a comment

Features & benefits

  • Superior by design
  • Advanced grouting technology
  • Higher mobility
  • User friendly
  • Minimum operational cost
  • Can be used in wide range of applications
  • Case story – Unigrout MAX 244 C (781kB, Pdf document) – Download

Technical specifications

Mixer Cemix 403 HWB
 Volume: 400 l
Agitator Cemag 402 H + 802 H
 Volume: 400 l + 800 l
Pumps 3 x Pumpax 110 B
 Capacity: 3 x 0-120 l/min
Grout pressure: 3 x 2-100 bar
Max granular size: 5 mm
Power Unit
 Electric motor: 2 x 45 kw

This model features two independent mixing units each equipped with a 1.3 ton cement silo, Cemix 203 HWB colloidal mixer mounted on load cells and the fully automated weight batching Dosac system.
The four agitators are independently connected to each grouting pump (the Pumpac 80/110 HD). A Logac G5 records the parameters of the four grouting delivery lines and controls the Addit system, a new feature that allows the injection of the additive at the mouth of hole, through a device specially installed in the top packer. 　
The full unit is enclosed in a specially made container that is mounted on a frame to be placed over a truck chassis. The setting also includes the hydraulic crane that sustains the alloy basket which in turn allows one of the operators to reach the holes and set the top packers.

Enquiry

Cemag 403 agigator: Agitator with medium volume

Atlas Copco, Grouting equipments, Grouting Products
Leave a comment

Features & benefits

Atlas Copco Cemag agitators serves as intermediate vessel between the mixer and the pump and it ensures that grout is always kept for the operation when grouting and mixing is being carried out simultaneously.

Also Cemag creates quality grouting, by means of counter currents in the agitator´s vessel, which keep the mixture in suspension and release air bubbles.

Technical description

Volume
160 gallons / 400 litres

Rotation speed of mixer shaft
60 – 70 rpm

The CEMAG agitator with its sloping bottom and inclined agitator shaft, creates the important counter
currents which keep the quality of the grout for a long time.
CEMAG can be delivered in four different sizes of containers: CEMAG 202, 402, 802 and 1602 for a
volume of 200, 400, 800 and 1600 litres respectively.The CEMAG is powered by an electric, hydraulic or
air prime mover.

Enquiry

Accessories for MAI SDA Self-drilling anchors

Ground and rock reinforcement tools, Self-drilling anchor systems
Leave a comment

Features & benefits

  • Reduced installation time increases productivity
  • Faster excavation
  • Easy to handle

Atlas Copco offers a range of accessories for MAI SDA Self-drilling anchors to suit different applications. The most common components are coupling boxes, centralizers, grout swivels and the pull-test equipment for testing the self-drilling anchors.

Enquiry

Plates for Swellex Expandable rock bolting systems

Drilling Tools, Ground and rock reinforcement tools, Rock bolting systems
Leave a comment

Features & benefits

• Fast installation
• Safe, easy and trouble free installation
• High performance
• High productivity
• Added features through plates with a lance

Atlas Copco offers a range of accessories for Swellex expandable rock bolts to suit a variety of applications. The most common components are Swellex plates and mesh washers. Swellex plates are used to create a local surface support around the borehole collar area. With point load anchor bolts, the plate is used to transfer the displacement of the rock mass into the rock bolt. The Swellex plates are manufactured from high qualtiy steel adn meet or exceed the properties stated in the individual specifications. The plate’s capacities are designed to meet customers’ requirements.

Enquiry

Terracore 43 conventional aluminum drill rod

Atlas Copco, Drilling Tools, Geotechnical core drilling tools
Leave a comment

Features & benefits

  • The lightweight makes the drill rods easy to handle for efficient drilling.
  • Ultimate strength from highest quality aluminum and optimal wall thickness.
  • Lightweight rods increase depth capacity.
  • Improved core quality resulting from reduced vibration.

Terracore conventional aluminum drill rods are available in sizes 43 to 53 mm, with steel couplings at both ends. The weight of aluminum rod is only about half that of corresponding steel rod yet provides the same strength. Terracore aluminum rods, therefore, increase drilling depth.

Enquiry

Secoroc Down The Hole bits

Atlas Copco, Down the hole drilling tools, Drilling Tools
Leave a comment

Features & benefits

  • Improved steel grade for better fatigue properties
  • Five basic front designs
  • Designs for all rock types

Atlas Copco Secoroc has a comprehensive range of DTH drill bits that have been designed to match all conceivable applications.

Each bit, made from quality tungsten carbide steel, is precision machined to produce a perfect body. They are then heat-treated to the right hardness, facilitating excellent surface compression and fatigue resistance. Manufactured in-house, each bit is finally fitted with the required shape and sized buttons.

We offer five basic bit designs: Convex, Flat front, SpeedBit, Concave, and Rocket Bit. These are designed for all types of rock, whether hard or soft, abrasive or fractured.